Gravity conveyor with 50 mm rolls suitable for normal box handling. The rollers have a spring loaded shaft end and bearing housings with steel balls adapted to roll easily even for lightweight goods. Choose plastic rollers if there is a requirement for quieter rolling, otherwise steel rolls that can withstand more loads. The side profiles are 70 mm high. The roller bed is 5 mm above the side profiles. Delivered unassembled with side profiles, rolls and assembly details. NB! Leg support and end stop are not included, and are to be ordered separately.
Gravity conveyors create efficient flows. Both for moving goods but also as a storage area. The leg supports are adjustable in height and the roller bed can be adjusted to provide the required gravitational assistance to the goods you want to move. With a slight inclination, you get help manually pushing a package at a packing station. With a larger gradient, the goods will roll away solely by gravity.
In order for your goods to roll easily, it should always be in contact with at least three rollers. Place the rollers with a c/c dimension which is the minimum width of the box divided with three. If the bottom of the box is uneven, or soft, the spacing must be tighter.
Our conveyors are delivered in three lengths. If that is not enough to create the required total length, you can cut the side profiles yourself to your requirements. The load capacity is limited either by the side profiles or by the load capacity of the rolls, and is stated as load per meter for a spreaded load. Extra leg supports gives less deflection of the side profiles, therefore the load capacity per leg support spacing is indicated.